Agent | 简体中文

Home>Product>Power BankPower Bank

BAT10000 Power bank

FCC Certicate

 

CE Certicate

 

 

moretop BAT10000 supports built-in  lithium ion battery which is up to10200 mAh high capacity. It supplys two USB  charging ports and can charge for two mobile phones or two tablets meanwhile.  So it can make your device continue to use normally in emergency situations without electricity. MEASY BAT10000 is really an essential backup power for you.

 

 

BAT10000 portable power supply USB1 :5V-2A and USB2:5V-1A, and two 5V-1A type A USB output port.With different charge ports, it can charge for your mobile device, such as Apple iPad / Samsung Galaxy Tab, also can charge for your other device, such as iPhone, iPod, PSP 

 

A full charged BAT10000 portable power can recharge for a depleted power iPhone 5 times. If for an iPad without no electric, the BAT10000 can charge it full. For some long-distance traveller, air traveller and camplers, BAT10000 is the best choice of the backup power. 

 


 

 

 

 

BAT10000 integrates the interfaces as follows 

USB  charging output port  2
Micro USB port for charging the mobile devices 1
Power/light button  1
LED power indicator  4
Led light  1

 

 

 

1. small volume, the size just61.3*9MM, large capacity of the battery, can up to 10000mAh.
2. Ergonomic design. The right side had been desiged into a smooth arc, and the power button was put on 
    the left side of it. Both  ends tucked into a radian. It is easy held in the hand, and also convenient to be 
    placed in the trunk.
3. The design of the torch light on the top, make it is more convenient for you when light is not enough.
4. The front 4 Blue LED power indicators, make you know the remaining electricity more convenient. 
 
 
 
 
 
 
 

 


 

The batteries core is the most crucial parts of the mobile power. It is quality decide the life of the entire mobile battery, also decide the charging time every time. MEASY BAT10000 used the original imported Panasonic Alithium-ion batteries, can bear high temerature and owercharge, no explpsion, no burning and long using life.

 

 

The CPU of BAT10000 is an intelligent control circuit chip which integrated charge mangement module, the cureent detection module and boost discharge management module. It has high efficient and stable output, perfect protection design.With overcharge protection ,over-discharge protection, overload protection and shore circuit protection. Can ensure the safty of the mobile phones'charging effectively. 

 

 

 

There had been set up a protection circuit in order to protect the lithium-ion batteries in the panels. Due to the chemical properties of the lithium-ion battery, during normal use, there is a positive reaction bettwen its internal chemical energy and chemical energy, and make them change into each other. But under certain conditions, such as its overcharge, over-discharge and over-current will result in battery internal chemical side effects. And the increased side effects will seriously affect the performance and service life of the battery, and may produce large amounts of gas. That make the battery internal pressure increase rapidly then explode ,theb lead to security problem.Therefore, all of the Lithium-ion battery requires a protection circuit for detecting the charge an discharge state of the battery  effectively. And make it can disconnect the circuit when the battery voltage is less than 2.4 volts, the battery is charged to 4.2 volts or when the battery was discharge with large current or shore-circuit .That can protect the battery and prevent damaging to the battery.

 

 

A. External charge: while using BAT10000 to charge Iphone, Ipad:

 

 

1. choose the correct mobile adaptor and connect it with USB charging cable. Then connect it with the 
    charging port of the mobile power, and other end connected with the port of the mobile phone, ipad.
2. Press the power indicator button, the LED power indicator will light automatically and enter to the mode 
    of charging.The lighted LED will go out in 2 seconds without any operation. After press the power 
    button one time, the mobile power will open for external charging in two minutes.
3. BAT10000 will automatically cut off charging after it was full of charge, and will keep the standby state. 
 
 

 

 

B. Internal charge: while using BAT10000 to charge the internal of bank power

 

 

1. Use the USB cable and Mini Micro USB plug to connect the power adapter and backup power, power 
    on then could charge the backup power. You also can charge from the USB port of the computers.
2. While charging, LED power indicators will twinkle according to corresponding charging status.
3. When 4 LED power indicators are all light, cut off the power.
 
 
 
 
 
 

C. Power indication

 

 

Under any situation, the power indicators will display the remaining power of the 
backup power by pressing the power button. Each one represents 25% of power.

 

The using of the flashlight 

 

Press the power button twice continuously , then the LED light of the flashlight will turn on .Then go on pressing the power button twice contiuously , the LED light will turn off .

 

 

Battery capacity 10200mAh
Battery type 3.7V - 3400mA 3 lithium polymer
Input 5V – 500mAh~1000mAh
Output 5V~1A
Charge time 8-10 hours(charging backup power)
Discharge time
about 1 hours for an Ipad, about 1hour for 
Iphone or other mobile devices,
 

 

 

 

 

 

 

 

Size(L*W*H): 163 x 111 x 35 mm
Weight:  0.18 Kg 

 

 

 

QTY/CTN:  50 PCS 
N.W/CTN:  9 Kg 
G.W/CTN:  10 Kg
CTN Size:  58x34x20.5 cm
 

 

Moretop Co.,Ltd. Address: shengtang Building, Tai ran 9th road, Chegongmiao, Fu tian district, Shenzhen, China.
©Copyright 2015 Moretop Co., Ltd.. all right reserved.     Tel: 86-755-23981803 Fax: 0755-23981800 Email: sales@moretop.net